|
Fiberline FB™ lining is a superior corrosion prevention system with excellent temperature characteristics (250°F) for corrosive flowing gas and oil wells, CO2 injection, and other enhanced recovery applications.
Quick FactsRecommended Services- Flowing gas and oil wells
- C02 injection - WAG
- Polymer injection (EOR)
- Water flood
- Coal vein gas production
- Saltwater disposal
- Refinery piping
Benefits- Long service life
- Holiday free liner
- Acid resistance
- Good for reconditioning pipe
- Superior joint protection
- Replace use of corrosion resistant alloys
Characteristics- No pressure limits
- No depth limits
- Temperature: 250°F*
- Full-Bore ID
Fiberline FB™ fiberglass internal tubing liners have been developed to meet the severe challenges and demands of a rapidly developing EOR technology. Fiberline FB™ will resist high temperatures (250°F),* frequent wire line service, heavy acid treatments, reasonable decompression conditions, O2, CO2, H2S gases and typical pin end and "J" section tubing corrosion. Fiberline FB™ eliminates the need for expensive coupling systems or replacement rings.
Protective MechanismBecause the fiberglass liner used in the Fiberline FB™ system is holiday free, cemented securely in place and sealed at both ends by the Fibersert connection system, the steel tube is totally isolated from all internal corrosive fluids. Internal corrosion is therefore fully prevented.
Setting DepthsIn down-hole use, the only depth limitation is a down-hole temperature in excess of 250°F.* The added weight of the fiberglass liner is negligible and puts no additional restriction on lining depths, since the tensile limitations of steel tubing are greater than the Fiberline FB™.
*Additional resin systems are available that allow usage in environments in excess of 300°F.
|
